Headlamp Switch: Service and Repair

Light Switch (E1)

The following components are integrated in the light switch:

• Fog lamp switch (E7)

• Rear fog lamp switch (E18)

• Headlamp switch illumination bulb (L9)

Removal

- Switch off the ignition and all electrical consumers and remove the ignition key.

- Turn the rotating handle of the light switch to position "0".

- Press in the rotating handle of the light switch - 1 - and turn slightly toward the right - 2 -.

- Hold rotary handle in this position and remove light switch on rotary handle from instrument cluster - 3 -.






- Disconnect the connector - arrow -.






Installation

- Connect the harness connector to the light switch.

- Hold light switch firmly and press in rotary handle of light switch - 1 - and turn slightly toward right - 2 -.






- Hold rotary handle in this position and insert light switch into instrument cluster - 3 -.

- Turn rotary handle to position "0", release and engage switch.