Diagram 151/7 (Tracks 71-84)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Back-up lamp switch, Transmission fluid temperature sensor, Transmission output speed sensor, Transmission output speed sensor 2, Gear position distance sensor 4, Driveshaft speed sensor 1, Driveshaft speed sensor 2, Temperature sensor in control module, DSG transmission Mechatronic





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

F4 - Back-up lamp switch Locations

G93 - Transmission fluid temperature sensor Locations

G195 - Transmission output speed sensor Locations

G196 - Transmission output speed sensor 2 Locations

G490 - Gear position distance sensor 4 Locations

G501 - Driveshaft speed sensor 1 Locations

G502 - Driveshaft speed sensor 2 Locations

G510 - Temperature sensor in control module Locations

J743 - DSG transmission Mechatronic Control modules in front part of vehicle - Overview of Control Modules DSG Transmission Mechatronic -J743-

T10s - 10-pin connector

T20e - 20-pin connector

(A76) - KS-diagnostic lead connection (in instrument panel wiring harness)

(B383) - Powertrain CAN bus high connection 1 (in main wiring harness)

(B390) - Powertrain CAN bus low connection 1 (in main wiring harness)

* - Through October 2010

*2 - From November 2010

Previous Diagram 151/6 (Tracks 57-70)

Next Diagram 151/8 (Tracks 85-98)