Parallel Movement, Adjusting

Parallel Movement, Adjusting

• The parallel movement adjustment can only be performed with removed drive motor and glass panel (in zero position).

- Remove drive motor for sunroof glass panel, refer to => [ Sunroof Glass Panel Drive ] Service and Repair.

Marking - arrow - on upper part of rear guide - 1 - must be located on both sides between markings dimension - a - at slotted guide rail - 2 -.






Link guide - 2 - must be engaged in guide rail (cannot be moved by hand).

- Slide upper part of guide - 1 - at left and right centered between the markings.

- Install drive motor (zero position) in this position.

• Then check the zero position.