Instrument Cluster, Replace

Instrument Cluster, Replace

Special tools, testers and auxiliary items required

• Vehicle Diagnostic, Testing and Information System (VAS 5051A)

• Diagnostic cable (VAS 5051/6A)

Work procedure to replace instrument cluster contains the following scope of work:

• If a new instrument cluster is installed in the vehicle, the control module for instrument cluster must be set to the various equipment characteristics and corresponding country version.

• In order to adapt the integrated anti-theft immobilizer to the Engine Control Module (ECM), data from ECM must be stored in the replacement instrument cluster.

• Also, all ignition keys must be adapted after installation of a new instrument cluster.

- Connect the (VAS 5051A).

- Select "Guided Fault Finding" in the (VAS 5051A).

- Using the "Go To" button, select "Functions/Component selection" and the following menu options in sequence:

• Body

• Electrical Equipment

• 01 - On Board Diagnostic (OBD) capable systems

• Instrument Cluster

• Instrument cluster functions

• Instrument Cluster, Removing and Installing