Engine Speed Sensor: Service and Repair

Engine Speed Sensor G28

Removing

- Remove the engine cover.

- Loosen the charge air hose clamp - 2 -.






- Disconnect the electrical connector - arrow -.

- Remove the noise insulation.

- Remove the bolts - 1 and 4 - and remove the charge air pipe downward from the throttle valve control module.

- Remove the charge air hose - 1 - from the charge air cooler and remove the hose downward.






- Disconnect the connector - 1 - from the engine speed sensor.






- Remove the engine speed sensor bolt.

Installing

Install in the reverse order of removal. Note the following:

• Tightening specification, see - item 7 - in the => [ Ignition System Component Overview ] Service and Repair.