ASMT - DTC 2711, Implausible Shift Sequence Stored

30 13 01

January 3, 2013

2028714 *Supersedes T.B. V301205 dated December 19, 2012 to update service number.*





Vehicle Information

Condition

DTC P2711 Implausible Transmission Shift Sequence Stored in the Transmission Control Module

Tip:

This Technical Bulletin is for fault code P2711 ONLY, if any other faults appear with this code, perform normal GFF processes and diagnoses.

DTC as described may cause shifting concerns and/or a lack of mobility upon initial startup. For example, the selector is moved to Drive or Reverse and the transmission does not engage the selected gear.

Technical Background

Debris in the clutch assembly causing too much drag torque from the multiple clutch.

Production Solution

Updated clutch installed as of March 12, 2010.

Service

If the Transmission Control Module has fault code P2711 (only) and more than 19,000 miles, replace the multiple clutch and cover, see Repair Manual Group 30 in ElsaWeb. If more than P2711 is in the Transmission Control Module or the vehicle has less than 19,000 miles, the faults need to be diagnosed using normal GFF processes.

Note:

The clutch should not be replaced without proper diagnoses and/or meeting the mileage requirements.








Warranty





Required Parts and Tools

No special tools required.

Additional Information

All part and service references provided in this Technical Bulletin are subject to change and/or removal.
Always check with your Parts Dept. and Repair Manuals for the latest information.