Inner Assembly Components

Inner Assembly Components






Removing Support

- Remove the lift cylinder for the headlamp washer system.

- Remove the bolts - 3 -.

- Loosen the catches - arrows - from the support.

Installing Support Piece

- Press the support - 2 - into the catches - arrows - in the bumper cover - 1 -.

- Tighten the screws, tightening specification: 2 Nm.

Removing Assembly Part

- Remove the fog lamp.

- Remove the bolts - 3 -.

- Loosen the catches on the assembly part.

Installation

- Press the assembly part - 4 - securely into the catches inside the bumper cover - 1 -.

- Tighten the screws, tightening specification: 2 Nm.