Access/Start Authorization Antenna In Rear Bumper (R136)

Access/Start Authorization Antenna In Rear Bumper (R136)

Component location of Access/Start Authorization Antenna in rear bumper is behind the rear bumper cover.

• No coding, basic setting or adaptation is necessary if access/start authorization antenna in rear bumper is replaced. Erase the entry in the DTC memory in "Guided Fault Finding" with the Vehicle diagnostic tester.

Removing

- Turn off the ignition and all electrical consumers.

- Remove the rear bumper cover.

- Remove the access/start authorization antenna in rear bumper (R136) - 1 - from the bumper lower section. Pay attention to the wires still connected.






- Disconnect the connector - 2 - and remove the access/start authorization antenna in rear bumper - 1 -.

Installation

Installation is performed in the reverse order of removal.