Parking Brake System: Adjustments

Parking Brake, Adjusting

The parking brake must be adjusted after replacing the parking brake cables or the brake calipers.

- Depending on the center console version, either remove only the cup holder, the rear cover or the entire center console.

- Press the foot brake forcefully at least three times.

- Engage the parking brake three times and release it.

The parking brake lever must go back into the rest position by itself under the first detent.

• Parking brake lever in the released position.

- Tighten the adjusting nut - arrow (magnified area) - so far,...






- ... the levers - 1 - on the brake calipers lift off from their stops - 2 -.






- The distance - a - to the stop - 2 - on the left and right brake caliper must not exceed 1.5 mm together.

- Check whether the wheels turn freely.

with Bosch Rear Brakes






- Tighten the adjusting nut until the levers - 1 - on the brake calipers lift off from their stops - 2 -.

- The distance- a - between the lever - 1 - to the stop - 2 - on the left and right brake calipers may be less than or equal to 1.5 mm together.

- Check whether the wheels turn freely.

Due to the automatic rear brake adjuster, there is no need to adjust the parking brake after making the initial adjustment.