Left Footwell Lamp (W9)

Left Footwell Lamp (W9)

Special tools, testers and auxiliary items required

• Trim Removal Wedge (VAS 3409)

• When removing and installing components in a visible area (switches, covers, trim, etc.), mask off the areas at which a prying tool ( (VAS 3409) , screwdriver) will be positioned, using commercially available adhesive tape.

• Removal and installation for both footwell lights is performed in the same way and is only described for one light.

Removal

- Switch off ignition, switch off all electrical consumers and remove ignition key.

- Remove the screw - arrow - and remove the bracket - 1 -. Pay attention to the wires still connected as well as to the footwell lamp and the diagnostic socket.






- Disconnect the connector - 2 - and unclip the diagnostic socket - 3 - from the bracket.

Installation

Install in reverse order of removal, noting the following:

- Tighten the screw on the bracket for the footwell lamp and diagnostic socket to 1.5 Nm.