Diagram 67/14 (Tracks 169-182)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Engine speed sensor, Fuel temperature sensor, EGR potentiometer, Charge pressure actuator position sensor, Engine control module, EGR vacuum regulator solenoid valve





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G28 - Engine speed sensor
Locations
[1][2]Diagrams

G81 - Fuel temperature sensor 2.0L CJAA TDI Diagrams

G212 - EGR potentiometer 2.0L CJAA TDI EGR Vacuum Regulator Solenoid Valve -N18- / EGR Potentiometer -G212-

G581 - Charge pressure actuator position sensor 2.0L CJAA TDI Charge Pressure Actuator Position Sensor -G581-

J519 - Vehicle electrical system control module Control modules in front part of vehicle - Overview of Control Modules

J623 - Engine control module, in the center plenum chamber Control modules in front part of vehicle - Overview of Control Modules

N18 - EGR vacuum regulator solenoid valve 2.0L CJAA TDI EGR Vacuum Regulator Solenoid Valve -N18- / EGR Potentiometer -G212-

T6y - 6-pin connector

T60 - 60-pin connector

(220) - Sensor ground connection (in engine compartment wiring harness)

(D101) - Connection (1) (in engine compartment wiring harness)

Previous Diagram 67/13 (Tracks 155-168)

Next Diagram 67/15 (Tracks 183-196)