Diagram 67/15 (Tracks 183-196)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Camshaft position sensor, Fuel pressure sensor, Intake manifold runner position sensor, Exhaust gas recirculation position sensor 2, Engine control module, Valve 2 for EGR, Intake flap motor





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G40 - Camshaft position sensor
Locations
[1][2]Camshaft Position Sensor

G247 - Fuel pressure sensor
Locations
Diagrams

G336 - Intake manifold runner position sensor
Locations
[1][2]Diagrams

G466 - Exhaust gas recirculation position sensor 2 Valve 2 For EGR -N213- /Exhaust Gas Recirculation Position Sensor 2 -G466-

J519 - Vehicle electrical system control module Control modules in front part of vehicle - Overview of Control Modules

J623 - Engine control module, in the center plenum chamber Control modules in front part of vehicle - Overview of Control Modules

N213 - Valve 2 for EGR 2.0L CJAA TDI Valve 2 For EGR -N213- /Exhaust Gas Recirculation Position Sensor 2 -G466-

T3d - 3-pin connector, on the engine, front

T5r - 5-pin connector

T6ba - 6-pin connector

T60 - 60-pin connector

V157 - Intake flap motor
Locations
[1][2]Diagrams

(220) - Sensor ground connection (in engine compartment wiring harness)

(328) - Sensor ground connection 2 (in engine compartment wiring harness)

(D101) - Connection (1) (in engine compartment wiring harness)

(D141) - Connection (5V) (in engine wiring harness)

Previous Diagram 67/14 (Tracks 169-182)

Next Diagram 67/16 (Tracks 197-210)