Diagram 67/16 (Tracks 197-210)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Engine coolant temperature sensor, EGR temperature sensor, Engine control module, Wastegate bypass regulator valve, Positive crankcase ventilation heating element, EGR cooler switch-over valve





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G62 - Engine coolant temperature sensor
Locations
Engine Coolant Temperature Sensor -G62-

G98 - EGR temperature sensor 2.0L CJAA TDI Diagrams

J519 - Vehicle electrical system control module Control modules in front part of vehicle - Overview of Control Modules

J623 - Engine control module, in the center plenum chamber Control modules in front part of vehicle - Overview of Control Modules

N75 - Wastegate bypass regulator valve
Locations
[1][2]Diagrams

N79 - Positive crankcase ventilation heating element 2.0L CJAA TDI [1][2]Diagrams

N345 - EGR cooler switch-over valve

T10l - 10-pin connector, on the lower left coolant fan

T14a - 14-pin connector, near the battery Overview of connector stations and connectors

T60 - 60-pin connector

T94 - 94-pin connector

(474) - Sensor ground connection (in engine wiring harness)

(D102) - Connection (2) (in engine compartment wiring harness)

* - Only for vehicles with crankcase ventilation heater

*2 - Through April 2011

*3 - From May 2011

Previous Diagram 67/15 (Tracks 183-196)

Next Diagram 67/17 (Tracks 211-224)