Operation CHARM: Car repair manuals for everyone.

Diagram 67/17 (Tracks 211-224)






IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Brake lamp switch, Fuel pump relay 2, Engine control module, Fuel pump 2





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

E16 - Heater/heat output switch

F - Brake lamp switch ABS Mark 70 (ABS/ASR) [1][2]Brake Light Switch

J49 - Fuel pump relay 2 Overview Of Relay Carrier

J359 - Low heat output relay Overview Of Relay Carrier

J360 - High heat output relay Overview Of Relay Carrier

J519 - Vehicle electrical system control module Control modules in front part of vehicle - Overview of Control Modules

J623 - Engine control module, in the center plenum chamber Control modules in front part of vehicle - Overview of Control Modules

T4bc - 4-pin connector

T10l - 10-pin connector, on the lower left coolant fan

T14a - 14-pin connector, near the battery Overview of connector stations and connectors

T20c - 20-pin connector

T52c - 52-pin connector

T60 - 60-pin connector

T94 - 94-pin connector

V277 - Fuel pump 2

(389) - Ground connection 24 (in main wiring harness)

(656) - Ground connection on right headlamp

(B131) - Connection (54) (in interior wiring harness)

* - From November 2009

*2 - Through October 2009

*3 - Through April 2011

*4 - From November 2010

*5 - Only for vehicles without an A/C system

*6 - Only for vehicles with auxiliary heater

*7 - only for vehicles with dual clutch transmission

*8 - Only for vehicles with DSG transmission

*9 - From May 2011

Previous Diagram 67/16 (Tracks 197-210)

Next Diagram 67/18 (Tracks 225-238)