Crankshaft Main Bearing

Crankshaft Main Bearing Cap Bolts
Always replace bolts
First step 65 Nm
Second step Tighten an additional 90° (1/4) turn
Tighten to 65 Nm to measure the radial play, but do not tighten the additional torque angle

Crankshaft
Axial play
New 0.07 to 0.17 mm
Wear limit 0.37 mm
Radial clearance
New 0.03 to 0.08 mm
Wear limit 0.17

Crankshaft Dimensions

(Dimensions are in mm)