Bumper Cover Attachments

Bumper Cover Attachments






1 Rear Bumper Cover

• PP/EPDM material

2 Bracket

• Right

• Attaches the wheel housing liner to the bumper cover.

3 Bolt

• Tightening specification: 2 Nm

• 2 pieces per side

4 Right Rear Reflector

• Attached inside the rear bumper cover.

• To be removed only with rear bumper cover removed.

5 License Plate Lighting

• Quantity: 2

• Removing.

6 Towing Eyelet Cap

• Secured to spoiler.

7 Trailer Hitch Cover Cap

• Attached in the spoiler - 5 -.

8 Spoiler

• Material PC/ABS

• Attached inside the rear bumper cover.

• To be removed only with rear bumper cover removed.

9 Clips

• Different quantity is possible.

10 Pop Rivet Nut

• 2 minimum

11 Left Rear Reflector

• Attached inside the rear bumper cover

• To be removed only with rear bumper cover removed.

12 License Plate Holder

• Installing, refer to => [ Rear Bumper License Plate Holder ] Rear Bumper License Plate Holder.

13 Bracket

• Left

• Attaches the wheel housing liner to the bumper cover.

14 Bolt

• Tightening specification: 2 Nm

• 2 pieces per side