Bumper Cover Overview

Bumper Cover Overview






1 Rear Bumper Cover

• PP/EPDM material

2 Bolt

• Tightening specification: 2 Nm

• 2 pieces per side

• Left and right

• Attached to the wheel housing liner.

3 Bolt

• Tightening specification: 2 Nm

• Quantity: 2

• Attached to the back panel.

4 Bolt

• Tightening specification: 2 Nm

• 3 pieces per side

• Attached to the wheel housing liner.

5 Bolt

• Tightening specification: 2 Nm

• Left and right

• Pointing upward

• Attached to the side panel.