Left Bucket Seat Trim

Left Bucket Seat Trim

• The following describes removing and installing on the left side of the vehicle. Removing and installing on the right side is identical.

Removing

- Remove front seat. Refer to => [ Front Seat ] Front Seat

- Remove bolt - 1 - (2.5 Nm).

- Pull handle - 3 - upward and press metal clamp tab - 2 - inward with a small screwdriver. Remove handle downward from adjusting lever - 4 -.

• For clarity, securing clip is depicted as removed in the illustration.

- Remove the clip - 2 - from the adjusting lever - 4 -.

- Using assembly tool (3399) , reach behind backrest adjusting wheel locking mechanisms - 5 -.

- Pry assembly tool (3399) outward - arrow A - and remove backrest adjusting wheel from seat.

- Press clamping pin - 7 - inward and remove the clip - 6 -.

- Remove trim - 8 - from mounts on seat.






Installing

- Install in reverse order of removal.