Power Seat Bracket and Support

Power Seat Bracket and Support

• The following describes removing and installing on the left side of the vehicle. Removing and installing on the right side is identical.

Removing

- Switch off ignition.

- Remove left power seat trim. Refer to => [ Left Power Seat Trim ] Left Power Seat Trim

- Remove bolts - 1 - (3.5 Nm) and remove bracket - 2 - from seat frame.

- Remove two bolts - 3 - (3.5 Nm) and remove bracket - 4 - and spacer pipe - 5 - from seat frame.






Installing

- Install in reverse order of removal.