Diagram 136/12 (Tracks 141-154)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Accelerator pedal position sensor, Accelerator pedal position sensor 2, Vehicle electrical system control module, Engine control module, EVAP canister purge regulator valve 1, Camshaft adjustment valve 1





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G79 - Accelerator pedal position sensor Accelerator Pedal Module Overview [1][2]Accelerator Pedal Position Sensor

G185 - Accelerator pedal position sensor 2 Accelerator Pedal Module Overview [1][2]Accelerator Pedal Position Sensor

J519 - Vehicle electrical system control module Control modules in front part of vehicle - Overview of Control Modules

J623 - Engine control module, in the center plenum chamber Control modules in front part of vehicle - Overview of Control Modules

N80 - EVAP canister purge regulator valve
Locations
[1][2]Canister Purge Control Valve

N205 - Camshaft adjustment valve 1
Locations
[1][2]Diagrams

T4x - 4-pin connector, on the lower left coolant fan

T6h - 6-pin connector

T14a - 14-pin connector, near the battery Overview of connector stations and connectors

T60 - 60-pin connector

T94 - 94-pin connector

(D180) - Connection 87a (in engine compartment wiring harness)

(D181) - Connection 87a (in engine compartment wiring harness) 2

* - Coolant fan connection

Previous Diagram 136/11 (Tracks 127-140)

Next Diagram 136/13 (Tracks 155-168)