Diagram 136/14 (Tracks 169-182)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Brake lamp switch, Oxygen sensor in bank 1 center three way catalytic converter, Vehicle electrical system control module, Engine control module





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

F - Brake lamp switch ABS Mark 70 (ABS/ASR) [1][2]Brake Light Switch

G465 - Oxygen sensor in bank 1 center three way catalytic converter Exhaust System Overview Oxygen Sensor in Bank 1 Center Three way Catalytic Converter -G465- / Oxygen Sensor 3 Heater -Z62-

J519 - Vehicle electrical system control module Control modules in front part of vehicle - Overview of Control Modules

J623 - Engine control module, in the center plenum chamber Control modules in front part of vehicle - Overview of Control Modules

T4au - 4-pin connector, near the oxygen sensor, in the engine compartment, front, near the oxygen sensor

T4bc - 4-pin connector

T52c - 52-pin connector

T94 - 94-pin connector

Z62 - Oxygen sensor 3 heater Oxygen Sensor in Bank 1 Center Three way Catalytic Converter -G465- / Oxygen Sensor 3 Heater -Z62-

(389) - Ground connection 24 (in main wiring harness)

(A216) - Positive connection 2 (87a) (in instrument panel wiring harness)

(B131) - Connection 54 (in interior wiring harness)

(E30) - Connection 87a (in engine wiring harness)

* - Depending on equipment

Previous Diagram 136/13 (Tracks 155-168)

Next Diagram 136/15 (Tracks 183-196)