Rear Door Fixed Door Window

Rear Door Fixed Door Window

Removing






- Remove door trim.

- Remove the window shaft strip. Refer to => [ Outer Window Recess Seal ] Outer Window Recess Seal

- Remove the window guide. Refer to => [ Rear Door Window Guide ] Rear Door Window Guide

- Pry out cover caps - 4 -.

- Remove the bolts - 5 -.

- Fold back the seal - 2 - from the flange.

- Insert the (T10236) under both clips - 7 -.

- Push the door window - 1 - slightly out - arrow a - until the clips - 7 - are pushed out of the door - 3 -.

- Remove the door window - 1 - and the bar - 6 - - arrow b - from the door - 3 -.

Installation






- Install the door window - 1 - into the door - arrow a -.

- Push the door window onto the door - 5 - until the clips - 6 - audibly latch - arrows b -.

- Tighten bolts - 4 -, tightening specification: 8 Nm.

- Fold back the seal - 2 - around the flange.