Windshield Wiper System

Windshield Wiper System


Follow the procedure in the Repair Information when disconnecting and connecting the battery. Refer to => [ Battery, Disconnecting and Connecting ] Battery, Disconnecting and Connecting.

• Additional information:

Refer to the Owner's Manual.

General Description

The Wiper Motor Control Module (J400) is integrated with the Windshield Wiper Motor (V).

To remove wiper blades, wiper arms must be driven into service/winter position. The service/winter position is activated by operating windshield wiper lever in "one-touch wiping" position within 10 seconds after switching off ignition. Refer to the Owner's manual.






DTC Recognition and Display

Vehicle Electrical System Control Module (J519) is equipped with On Board Diagnostics (OBD) which assists in troubleshooting.

Use the Vehicle Diagnosis, Testing and Information System (VAS 5051A) under "Guided Fault Finding".