Operation CHARM: Car repair manuals for everyone.

Diagram 138/3 (Tracks 15-28)






IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Windshield wiper intermittent mode switch, Rear window wiper switch, Windshield and headlamp washer pump switch, Windshield washer fluid level sensor, Instrument cluster control module, Steering column electronics control module, Data bus on board diagnostic interface, Windshield washer fluid level indicator lamp





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

E22 - Windshield wiper intermittent mode switch

E34 - Rear window wiper switch

E44 - Windshield and headlamp washer pump switch

G33 - Windshield washer fluid level sensor

J285 - Instrument cluster control module Control modules in front part of vehicle - Overview of Control Modules

J519 - Vehicle electrical system control module Control modules in front part of vehicle - Overview of Control Modules

J527 - Steering column electronics control module Control modules in front part of vehicle - Overview of Control Modules

J533 - Data bus on board diagnostic interface, in the left footwell, near the center console Control modules in front part of vehicle - Overview of Control Modules

K37 - Windshield washer fluid level indicator lamp

T6bk - 6-pin connector

T16r - 16-pin connector

T20 - 20-pin connector

T32 - 32-pin connector

T52c - 52-pin connector

(44) - Ground connection on A-pillar, lower left

(367) - Ground connection 2 (in main wiring harness)

(410) - Sensor ground connection 1 (in main wiring harness)

(605) - Ground connection on upper steering column

(B397) - Comfort system CAN bus high connection 1 (in main wiring harness)

(B398) - Comfort system CAN bus high connection 2 (in main wiring harness)

(B406) - Comfort system CAN bus low connection 1 (in main wiring harness)

(B407) - Comfort system CAN bus low connection 2 (in main wiring harness)

Previous Diagram 138/2 (Tracks 1-14)