Mirror Glass

Mirror Glass

Special tools, testers and auxiliary items required

• Pry Lever (80-200)

• The following describes removing and installing the left mirror glass only. Removing and installing the right mirror glass is identical.

Removing






• Protect the paintwork on the edge of the housing with fabric-reinforced adhesive tape.

- Press the bottom of the mirror glass - 1 - into the mirror housing - 3 -.

- Remove the mirror glass - 1 - from the bracket - 2 - and housing - 3 - in - direction of arrow a - using the (80-200).

- Move the mirror glass - 1 - in - direction of arrow b - and disconnect the mirror heater connector - 4 - on the back of the mirror glass - 1 -.

Installation






- Connect the mirror heater connector - 3 - to the mirror glass - 1 -.

- Move the mirror glass - 1 - in - direction of arrow a -.

- Press the mirror glass - 1 - in the center and in- direction of arrow b - onto the mount - 2 - inside the housing - 4 -.

- The mirror glass - 1 - audibly engages.

• Then perform a function test.