Diagram 72/5 (Tracks 43-56)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Left rear thorax airbag crash sensor, Right rear thorax airbag crash sensor, Airbag control module, Driver head curtain airbag igniter, Front passenger head curtain airbag igniter





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G256 - Left rear thorax airbag crash sensor Locations LR Thorax Airbag Crash Sensor -G256- and RR Thorax Airbag Crash Sensor -G257-

G257 - Right rear thorax airbag crash sensor Locations LR Thorax Airbag Crash Sensor -G256- and RR Thorax Airbag Crash Sensor -G257-

J234 - Airbag control module, behind the center console Control modules in front part of vehicle - Overview of Control Modules

J519 - Vehicle electrical system control module Control modules in front part of vehicle - Overview of Control Modules

N251 - Driver head curtain airbag igniter Airbag Systems Overview Driver Head Curtain Airbag Igniter -N251- and Front Pass Head Curtain Airbag Igniter -N252-

N252 - Front passenger head curtain airbag igniter Airbag Systems Overview Driver Head Curtain Airbag Igniter -N251- and Front Pass Head Curtain Airbag Igniter -N252-

T2bf - Double connector

T2bg - Double connector

T3m - 3-pin connector, under the roof, near the left B-pillar

T3n - 3-pin connector, under the roof, near the right B-pillar

T50 - 50-pin connector

(109) - Ground connection (in airbag wiring harness)

* - Only for vehicles with 4 doors

*2 - Only for vehicles with 2-door equipment

Previous Diagram 72/4 (Tracks 29-42)

Next Diagram 72/6 (Tracks 57-70)