Fuel Supply System

Fuel Supply System


Fuel lines are under pressure.

Danger of personal injury to eyes and skin.

Wear protective eyewear and protective clothing in order to avoid injury and contact with the skin. Wrap a cloth around the connection before disconnecting a fuel hose. Open the connection carefully and release the pressure.

For safety reasons, interrupt the current to the fuel pump before opening the fuel system. Otherwise, the fuel pump will activate when the drivers door opens or when the ignition is turned on. It is possible to interrupt the current flow by using one of the following possibilities:

• Battery, disconnecting

or

• Removing the fuel pump (G6) fuse.

or

• Disconnecting the connector from the fuel delivery unit flange.

Always observe the following when removing and installing the fuel level sensor or the fuel pump from a full or partially filled fuel tank.

• Before starting work, switch the exhaust extraction system on and place an extraction hose close to the fuel tank opening to extract the fuel fumes. If no exhaust extraction system is available, a radial fan (as long as motor is not in air flow) with a displacement greater than 15 m3/h can be used.

• Prevent fuel from contacting skin! Wear fuel-resistant gloves!


Note the following whenever working inside the engine compartment due to limited space:

• Route all lines and wires in their original locations.

• Ensure sufficient clearance to all moving or hot components.