Headlamp: Description and Operation

Halogen Headlamps

• Always switch off headlamps and remove ignition key before working on headlamps.

• Familiarity with the function and operation of the lighting system is essential in the event of customer complaints.

• Additional information:

Refer to the Owner's Manual.

Headlamps from two different manufacturers are installed:

• Hella

• Valeo

Removing and installing the headlamp and its attachments is identical except for removing and installing the headlamp range control positioning motors and the cap behind the low beam bulb.

DTC Recognition and Display

Vehicle electrical system control is equipped with OBD which assists Fault Finding the headlamps.

For troubleshooting, use Vehicle Diagnostic, Testing and Information System (VAS 5051B) in operating mode "Guided Fault Finding".