Passive Occupant Detection System Repair Kit, Power Seats, Installing

Passive Occupant Detection System Repair Kit, Power Seats, Installing

• When installing, make sure the seat heating wiring harness does not get caught between the seat cushion and the passenger occupant detection system mat.

• Pressure hose must be routed without kinking.

• After being connected to the vehicle electrical system, verify that the replaced components can move easily by moving the seat.

After replacing, perform a basic setting on the passenger occupant detection system using a Vehicle Diagnosis Tester that has "Guided Fault Finding".


Basic setting must be performed when seat is not occupied.

Install in reverse order of removal. Note the following:

- Tape the insert - 2 - to the lower seat frame - 1 - with two-sided tape - 3 - as illustrated.






- Switch on ignition.


• Make sure that no persons are in the vehicle.

- Connect the battery.