Gear Shift Unit

Gear Shift Unit

Special tools, testers and auxiliary items required

• Thrust Piece (T10203)

• Sleeve (VW 423)

• Torque Wrench (5-50 Nm) (V.A.G 1331)

Removing the Locking Pin - A - from the Gear Shift Cover





- Remove the outer part of the locking pin.

- Then carefully pry out the locking pin with a screwdriver.

Pressing the Locking Pin - A - into the Gear Shift Cover





Installed position:

The mark - arrow - faces toward the upper part of the gear shift shaft.

Installing the Seal