Door Hinge Assembly Overview

Door Hinge Assembly Overview

• The illustration shows a right door hinge. The left door hinge is identical.

• Always replace the door hinge bolts after loosening them.

• Hinges are no longer manufactured as separated parts.

• Lubricate the new door hinge if the old one was replaced.






1 Door

• Removing and Installing, refer to => [ Door ] Door

• Adjusting, refer to => [ Door Adjustment ] Door Adjustment

2 Guide bolt

• Tightening specification: 10 Nm

3 Door hinge with door arrester

• lubricate if the hinge is replaced, refer to => [ New Door Hinges, Lubricating ] New Door Hinges, Lubricating

4 Bolt

• Tightening specification: 38 Nm

• Always replace bolts after loosening them

5 Bolt

• Installed from the inside of the vehicle

• Remove the lower A-pillar trim.

• Tightening specification: 50 Nm

• Always replace bolts after loosening them

6 Bolt

• Tightening specification: 38 Nm

• Always replace bolts after loosening them

7 Bolt

• Tightening specification: 50 Nm

• Always replace bolts after loosening them

8 Lower spacer plate

9 Adjustment ring

• Provides the eccentric pin adjustment range.

10 Bolt

• For the eccentric bolts

• Tightening specification: 28 Nm

11 Door hinge

• The door hinge is not separated.

• Lubricate if the hinge is replaced, refer to => [ New Door Hinges, Lubricating ] New Door Hinges, Lubricating

12 Bolt

• Tightening specification: 50 Nm

• Always replace bolts after loosening them

13 Bolt

• Tightening specification: 50 Nm

• Always replace bolts after loosening them

14 Bolt

• Tightening specification: 38 Nm

• Always replace bolts after loosening them

15 Upper spacer plate

16 Eccentric bolts

• The eccentric bolts are for adjusting the gap

17 Guide bolt

• Tightening specification: 10 Nm