Diagram 130/3 (Tracks 15-28)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Steering angle sensor, Steering torque sensor, Power steering control module, Electromechanical power steering motor





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G85 - Steering angle sensor Locations [1][2]Diagrams

G269 - Steering torque sensor Electromechanical Steering Gear Assembly Overview - Gen 2 [1][2]Diagrams

J500 - Power steering control module [1][2]Diagrams

J533 - Data bus on board diagnostic interface Locations

J623 - Engine control module

J682 - Terminal 50 power supply relay Locations Locations

SA2 - Fuse 2 (on fuse panel A) Locations

SC2 - Fuse 2 (on fuse panel C)

T2l - Double connector

T3ao - 3-pin connector

T4ae - 4-pin connector

T5g - 5-pin connector

T6z - 6-pin connector

T9b - 9-pin connector

T20 - 20-pin connector

T94 - 94-pin connector

V187 - Electromechanical power steering motor Electromechanical Steering Gear Assembly Overview - Gen 2 [1][2]Diagrams

(640) - Ground connection 2 in engine compartment, left

(A2) - Positive connection (15) (in instrument panel wiring harness)

(A199) - Positive connection 4 (15a) (in instrument panel wiring harness)

(B383) - Powertrain CAN bus high connection 1 (in main wiring harness)

(B390) - Powertrain CAN bus low connection 1 (in main wiring harness)

Previous Diagram 130/2 (Tracks 1-14)