Mirror Housing

Mirror Housing

• The following describes removing and installing the left mirror housing. Removing and installing the right mirror housing is identical.

Removing

- Remove mirror glass. Refer to => [ Mirror Glass ] Mirror Glass.






- Fold the exterior rearview mirror forward for easier installation.

- Press mirror housing using a screwdriver beneath catches - 2 - out of locking mechanisms.

- Pull mirror housing at the front slightly off the mirror base plate.

- Then, remove the mirror housing - 1 - from the mirror base plate.

Installation

- Position the mirror housing - 1 - on the mirror base plate and press down until the catches - 2 - engage audibly.






- Re-install mirror glass. Refer to => [ Mirror Glass ] Mirror Glass.

Then perform a function test.