Diagram 149/28 (Tracks 365-378)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Connection 6 (87a) (in engine compartment wiring harness), Connection (87a) (in engine wiring harness)





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G130 - Oxygen sensor after three way catalytic converter Locations Oxygen Sensor After Converter -G130- / Heater For Oxygen Sensor 1 After Converter -Z29-

G465 - Oxygen sensor in bank 1 center three way catalytic converter Locations Oxygen Sensor in Bank 1 Center Three way Catalytic Converter -G465- / Oxygen Sensor 3 Heater -Z62-

J299 - Secondary air injection pump relay

J519 - Vehicle electrical system control module Locations

N112 - Secondary air injection solenoid valve Locations [1][2]Air Injection Control Valve

SB15 - Fuse 15 (on fuse panel B) Locations

SB23 - Fuse 23 (on fuse panel B) Locations

T3d - 3-pin connector

T4ao - 4-pin connector

T4v - 4-pin connector

T14a - 14-pin connector

T40 - 40-pin connector

V144 - Leak detection pump Locations [1][2]Diagrams

(D202) - Connection 6 (87a) (in engine compartment wiring harness)

(E30) - Connection (87a) (in engine wiring harness)

Previous Diagram 149/27 (Tracks 351-364)

Next Diagram 149/29 (Tracks 379-392)