Flush Bonded Windows, Preparing New Window without Pre-Coating for glazing

Preparing New Window without Pre-Coating for glazing

All windows as replacement parts are not pre-coated.

• The application area for adhesive bead 3 is not pre-coated and not primed.

• The sealing lip is part of a new windshield.

- Clean window circumference to width of 20 mm all around using cleaning solution D 009 401 04.

- Then dry the edge of the window with a lint-free cloth.


The ceramic coating on the glass is not a glass/paint primer. It must be primed before the application of adhesive sealing material! Use only glass/paint primer D 009 200 02.

- Apply primer - 2 - uniformly in one stroke using applicator D 009 500 25 - 1 -.






• Drying time is approximately 10 minutes