Remote Control Key Battery with Cap, Foldable

Remote Control Key Battery with Cap, Foldable

Removing

- Flip the key bit out.






- Use screwdriver to unclip the cap - 1 - on the reverse side from the key - 2 - in the - direction of the arrow -.

- Use the proper type of screwdriver to unclip the battery - 1 - out of the key's battery case - 2 - in - direction of arrow -.






Installation

• Before installing the battery, one of the buttons must be pushed.

• The radio remote container is reset and only recognize a new battery.

Note polarity and installation position of battery when installing.






- Insert the battery - 1 - with the plus terminal upward in the battery case - 2 - - arrow -.

- Press the battery gently into the battery case until it snaps into place.

- Clip on the cap that is on the reverse side of the key.