Diagram 20/5 (Tracks 43-56)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Fresh air blower switch, A/C control module, Fresh air blower series resistor with fuse, Fresh air blower





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

E9 - Fresh air blower switch Climatic (Manual Climate Control) / Heater Overview

E256 - ASR/ESP button

J301 - A/C control module Overview Of Control Modules Climatic (Manual Climate Control) / Heater Overview A/C Control Module -J301-

J485 - Auxiliary heater operation relay

J533 - Data bus on board diagnostic interface Overview Of Control Modules

N24 - Fresh air blower series resistor with fuse Climatic (Manual Climate Control) / Heater Overview Diagrams

T4f - 4-pin connector

T5 - 5-pin connector

T10a - 10-pin connector, on the heater Overview Of Connector Stations and Connectors

T20 - 20-pin connector

T20c - 20-pin connector

T73b - 73-pin connector Overview Of Control Modules

V2 - Fresh air blower Climatic (Manual Climate Control) / Heater Overview Diagrams

(43) - Ground connection on A-pillar, lower right Locations

(366) - Ground connection 1 (in main wiring harness)

(388) - Ground connection 23 (in main wiring harness)

(602) - Ground connection in left front footwell Locations

(B397) - Comfort system CAN bus high connection 1 (in main wiring harness)

(B406) - Comfort system CAN bus low connection 1 (in main wiring harness)

(L5) - Connection 1 (in A/C unit wiring harness)

(L6) - Connection 2 (in A/C unit wiring harness)

* - Only for vehicles with auxiliary water heater

*2 - only for vehicles with High equipment (AW1)

*3 - only for vehicles with Low equipment (AW0)

Previous Diagram 20/4 (Tracks 29-42)