Instrument Panel Lamps and Switches

Tire Pressure Monitoring Display Button (E492)


• Turn off the ignition and all electrical consumers.

• Remove the key.

• When removing and installing components in visible area (switches, covers, trim, etc.), cover by taping the areas at which a prying tool ( trim removal wedge (VAS 3409) , screwdriver) will be positioned using commercially available adhesive tape.

The tire pressure monitoring display button - 1 - is located in the glove compartment.






Removing

- Remove the glove compartment.

- Release and disconnect the harness connector - arrow -.






- Release the tabs - arrows - and remove the tire pressure monitoring display button.






Installing

Install in reverse order of removal.