All Except GLI

Fastener Tightening Specifications






• 1 Always replace after removal.

• 2 Always tighten threaded connections in curb weight position. Refer to => [ Rear Axle, Lifting to Curb Weight Position ] Rear Suspension.

• 3 Tighten in the following sequence: Tighten to 90 + 90° turn, loosen one full turn (360°), then tighten to 90 + 90° turn.

• 4 Observe tightening sequence. Refer to => [ Installing ] Trailing Arm with Mounting Bracket.

• 5 Tighten uniformly.