Clutch: Application and ID

Determining Clutch Manufacturer

Either a "Sachs" or a "LuK" clutch may be installed.

It is possible to tell which clutch the vehicle has with the transmission installed:

- Remove the noise insulation.

- Remove the noise insulation from the oil pan, if necessary.

There are some openings - arrows - between the engine - A - and the transmission - B - near the bottom of the oil pan.






- Check the outer contour of the flywheel through this opening.

- The outer contour of the flywheel can also be inspected by removing - arrows - the small cover plate - A -.






A round outer contour - arrows - = a Sachs clutch - A -:






- Sachs clutch removing and installing. Refer to => [ Clutch, Sachs ] Clutch, Sachs.

- Sachs clutch overview. Refer to => [ Clutch Overview, Sachs ] Clutch Overview, Sachs.

A squared outer contour - arrows 1 - and a circulated depression - arrow 2 - = a LuK Clutch - B -:

or

A round outer contour - arrows 1 - and a circulated depression - arrow 2 - = a LuK clutch - B -:






- LuK clutch removing and installing. Refer to => [ Clutch, LuK ] Clutch, LuK.

- LuK clutch overview. Refer to => [ Clutch Overview, LuK ] Clutch Overview, LuK.