Function

Function

The sunroof only works when the ignition is switched on.

After the ignition is switched off, these functions are available until the driver or passenger door is opened.

The dial - 1 - opens the glass panel.






Opening the glass sunroof in the so-called comfort setting - 2 - prevents most driving noise which may occur when open completely.

The glass sunroof can be tilted and closed by pulling or pushing the rotary switch.

The sunroof is equipped with a closing force limiter in area of window. When an obstruction is met during the closing sequence, the roof opens again by itself.

There is also an emergency closing function. If there are problems closing the sunroof, it can be forced closed by pulling on the back end of the dial. The rotary switch must be in the "Sunroof closed" position.

For the emergency close function, the closing force limit is deactivated.

The motor for the sunroof has overheat protection, which activates under different conditions. After the sunroof motor has cooled down, it can be operated again.

If there is a malfunction in the electrical system, the sunroof motor can be moved using a hex wrench.