Pass-Through Unit with Center Armrest

Pass-Through Unit with Center Armrest

Removing

- Remove the backrest 2 /3. Refer to => [ Backrest ] Backrest.

- Fold down the center armrest and remove the trim - 1 - from the backrest frame - 2 - in direction of - arrow -.






- Remove the pass-through - 1 - from the backrest frame - 2 -.






- Remove the bolts - 1 - (2 Nm) and frame - 2 - from the backrest frame - 3 - in direction of - arrow -.

- Remove the backrest cover and cushion 2 /3. Refer to => [ Backrest Cover and Cushion, 2/3 Seat ] Backrest Cover and Cushion, 2/3 Seat.






- Remove the cap - 2 - from the center armrest bearing - 1 -.

- Remove the bolts - 4 - and - 5 - (8 Nm).

- Remove the center armrest - 3 - from the backrest frame - 6 - in direction of - arrow -.






- Remove the cap - 1 - from the retainer - 2 -.

- Remove the bolts - 3 - and - 4 - (12 Nm).

- Remove the center armrest - 5 - from the retainer - 2 -.






Installation

- Install in reverse order of removal.

• Check all the fasteners for damage and replace if necessary.