Low Beam Bulb

Low Beam Bulb


• Turn off the ignition and all electrical consumers.

• Remove the key.

• It is not necessary to remove the headlamp when replacing the headlamp bulb.

• The following illustrations show changing a bulb on the left headlamp.

Removing

- Remove the cap - 1 -.






- Turn the left low beam headlamp bulb socket - 1 - in - direction of arrow - and remove it from the headlamp.






- Remove the left low beam headlamp bulb - 2 - from the bulb socket - 1 - in - direction of arrow -.






Bulb: H7 12 V/55 W

Installing


• Do not touch the glass of the bulb during installation. Fingers will leave traces of grease on the glass which, when the light is switched on, will evaporate and cloud the glass.

• During installation, ensure proper seating of the cap. Water getting in the headlamp will cause damage.

- Check headlamp for functions.

- Check headlamp adjustment and adjust the headlamps. Refer to => [ Halogen Headlamp, Adjusting ] Halogen Headlamp, Adjusting.