Tires, with Run-Flat Tires, Tire, Pressing Off

Tire, Pressing Off


• Note the safety precautions. Refer to => [ Run-Flat Tire Safety Precautions ] Service Precautions.

- When pressing off tire on a tire mounting device with press-off blade, always make sure that tire valve/tire pressure sensor - arrow - is located opposite the press-off blade - 1 -.






Press-off blade must be applied at maximum 2 cm removed from rim flange.

- Remove the balance weight and any dirt from the rim.

- Press off both tire beads around circumference while thoroughly applying tire mounting paste between tire and rim flange - arrow -.