Diagram 50/17 (Tracks 211-224)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Oil pressure switch, Data bus on board diagnostic interface, Instrument cluster, Electronic power control malfunction indicator lamp





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

F1 - Oil pressure switch Locations [1][2]Diagrams

J119 - Multifunction indicator

J285 - Instrument cluster control module Overview Of Control Modules

J519 - Vehicle electrical system control module Overview Of Control Modules

J533 - Data bus on board diagnostic interface Overview Of Control Modules

K - Instrument cluster Overview Of Control Modules

K132 - Electronic power control malfunction indicator lamp

T1o - Single connector

T14 - 14-pin connector Overview Of Connector Stations and Connectors

T16 - 16-pin connector Overview Of Connector Stations and Connectors

T20 - 20-pin connector

T32 - 32-pin connector

T52c - 52-pin connector Overview Of Control Modules

(B383) - Powertrain CAN bus high connection 1 (in main wiring harness)

(B390) - Powertrain CAN bus low connection 1 (in main wiring harness)

(B397) - Comfort system CAN bus high connection 1 (in main wiring harness)

(B406) - Comfort system CAN bus low connection 1 (in main wiring harness)

* - Diagnostic connector

Previous Diagram 50/16 (Tracks 197-210)

Next Diagram 50/18 (Tracks 225-238)