Controls, Housing

Special Tools

Special tools, testers and auxiliary items required

• Used Oil Collecting and Extracting Device (V.A.G 1782)

• Thread Adapter from Kukko Support (22/1)

• Bracket (30-211 A)

• Thrust Piece (T10042)

• Drift (T10169) or (T10362)

• Thrust Piece (T40008)

• Hot Air Blower (V.A.G 1416)

• Thrust Piece (T10143) or

• Press Tool for Shaft Seal (T10180)

• Driving Sleeve (VW 244 B)

• Thrust Plate (VW 401)

• Thrust Plate (VW 402)

• Punch (VW 407)

• Tube 37 mm Dia. (VW 416 B)

• Guide Piece (VW 436 A)

• Guide Pin (VW 439)

• Holding Fixture (VW 801)

• Guide Piece (10-15)

• Thrust Pad (3124)

• Bearing Driver (3264)

• Subframe Support Assem. Device (3290)

• Thrust Piece (T10203)

• Punch (VW 411)

• Tube Trans. Drive Shaft (VW 426)

• Thrust Pad 16.5/28 mm Dia. (VW 431)

• Triple Square Socket Driver (3357)

• Connecting Pin (T10027 A)

• Hose Clamp Pliers (V.A.G 1275)

• Sleeve (VW 423)

• Pulling Hook (T20143/1)

• Transmission Support Jig (3336)

• Workshop Crane (VAS 6100)

• Thrust Block (T10083)

• Drip Tray for VAS 6100 (VAS 6208)

• Engine and Transmission Holder (VAS 6095)

Special tools, testers and auxiliary items required

• Engine Support Bridge (10-222 A)

• Engine Support Feet (10-222 A/8)

• Engine Support Adapter (10-222 A/3)

• Adapter (10-222 A/18)

• Transmission Support (3282)

Special tools, testers and auxiliary items required

• Support Elements (Pins) (2382/29)

• Adjustment Plate (3282/33)

• Transmission Support Jig (3336)

• Torque Wrench (5-50 Nm) (V.A.G 1331)

• Torque Wrench (40-200 Nm) (V.A.G 1332)

• Engine/Transmission Jack (V.A.G 1383 A)

Special tools, testers and auxiliary items required

• Bracket (T10346)

• Engine Support Device (3300 A)

• Adapter (VW 771/40)

• Hose Clamps up to 25 mm Dia. (3094)

Special tools, testers and auxiliary items required

• Holding Plate (VW 309)

• Holding Fixture (VW 313)

• Transmission Support (VW 353)

• Thrust Tube (VW 455) or Sleeve (3160)

• Slide Hammer-Complete Set (VW 771)

• - 1 - Kukko Puller 12-14.5 mm (21/1)

• - 1 - Kukko Extractor 14.5-18.5 mm (21/2)

• - 1 - Kukko Extractor 23.5-30 mm (21/4)

• - 1 - Kukko Extractor 18.5-23.5 mm (21/3)

• - 3 - Kukko Separating Tool 5-60 mm (17/0)

• - 4 - Kukko Support (Kukko 22/1)

• - 4 - Kukko Support (22/2)

Special Tools

Special tools, testers and auxiliary items required

• Used Oil Collecting and Extracting Device (V.A.G 1782)

• Thread Adapter from Kukko Support (22/1)

• Bracket (30-211 A)

• Thrust Piece (T10042)

• Drift (T10169) or (T10362)

• Thrust Piece (T40008)

• Hot Air Blower (V.A.G 1416)

• Thrust Piece (T10143) or

• Press Tool for Shaft Seal (T10180)

• Transmission Support (VW 353)

• Guide Piece (VW 436 A)

• Guide Pin (VW 439)

• Holding Fixture (VW 801)

• Guide Piece (10-15)

• Thrust Pad (3124)

• Bearing Driver (3264)

• Subframe Support Assem. Device (3290)

• Thrust Piece (T10203)

• Punch (VW 407)

• Punch (VW 411)

• Tube Trans. Drive Shaft (VW 426)

• Support Bracket (10-222 A/31)

• Thrust Pad 16.5/28 mm Dia. (VW 431)

• Triple Square Socket Driver (3357)