Diagram 33/3 (Tracks 15-28)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Compass magnetic field sensor, Vehicle electrical system control module, Data bus on board diagnostic interface





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G197 - Compass magnetic field sensor

J519 - Vehicle electrical system control module Overview Of Control Modules

J533 - Data bus on board diagnostic interface Overview Of Control Modules

T6au - 6-pin connector

T20 - 20-pin connector

T52c - 52-pin connector

(86) - Ground connection 1 (in rear wiring harness)

(431) - Ground connection 2 (in roof wiring harness)

(662) - Ground connection in left rear side panel Locations

(A178) - Infotainment CAN bus high connection (in instrument panel wiring harness)

(A179) - Infotainment CAN bus low connection (in instrument panel wiring harness)

(A225) - Infotainment CAN bus high connection 2 (in instrument panel wiring harness)

(A226) - Infotainment CAN bus low connection 2 (in instrument panel wiring harness)

(B397) - Comfort system CAN bus high connection 1 (in main wiring harness)

(B406) - Comfort system CAN bus low connection 1 (in main wiring harness)

* - Only for vehicles without Start/Stop system

*2 - Only for vehicles with Stop/Start system

Previous Diagram 33/2 (Tracks 1-14)

Next Diagram 33/4 (Tracks 29-42)