Diagram 64/13 (Tracks 155-168)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Ground connection 1 (in engine compartment wiring harness), Ground connection 2 (in engine compartment wiring harness), Ground connection 3 (in engine compartment wiring harness)





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

F34 - Brake fluid level warning switch Locations

F266 - Engine hood contact switch Locations

G266 - Oil level thermal sensor Locations

J179 - Automatic glow time control module Overview Of Relay Carrier [1][2]Diagrams

J623 - Engine control module Overview Of Control Modules

J842 - A/C compressor control module

N280 - A/C compressor regulator valve Locations [1][2]Diagrams

T2ap - Double connector

T2m - Double connector

T2n - Double connector, in the engine compartment, left, near the headlamp

T4t - 4-pin connector, near the starter Overview Of Connector Stations and Connectors

T6z - 6-pin connector, near the E-box Overview Of Connector Stations and Connectors

T8ay - 8-pin connector

T11a - 11-pin connector

T14ax - 14-pin connector

T14hy - 14-pin connector, black

T80 - 80-pin connector

T94 - 94-pin connector

(85) - Ground connection 1 (in engine compartment wiring harness)

(114) - Ground connection (in automatic transmission wiring harness)

(131) - Ground connection 2 (in engine compartment wiring harness)

(132) - Ground connection 3 (in engine compartment wiring harness)

(167) - Ground connection 4 (in engine compartment wiring harness)

* - Refer to applicable engine wiring diagram

*2 - only for vehicles with hybrid drive

Previous Diagram 64/12 (Tracks 141-154)

Next Diagram 64/14 (Tracks 169-182)