Diagram 8/12 (Tracks 141-154)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Engine speed sensor, Intake air temperature sensor, Manifold absolute pressure sensor, Engine control module, EVAP canister purge regulator valve 1





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G28 - Engine speed sensor Locations [1][2]Diagrams

G42 - Intake air temperature sensor Locations Charge Air Pressure Sensor -G31- / Intake Air Temperature Sensor -G42-

G71 - Manifold absolute pressure sensor Locations Manifold Absolute Pressure Sensor -G71- /Intake Air Temperature Sensor -G42-

J623 - Engine control module Overview Of Control Modules

N80 - EVAP canister purge regulator valve 1 Locations [1][2]Canister Purge Control Valve

T2dt - Double connector

T3ag - 3-pin connector

T4ax - 4-pin connector

T4x - 4-pin connector Connector Locations

T14 - 14-pin connector, near the battery Connector Locations

T60 - 60-pin connector

T94 - 94-pin connector

(D101) - Connection (1) (in engine compartment wiring harness)

* - Coolant fan connection

Previous Diagram 8/11 (Tracks 127-140)

Next Diagram 8/13 (Tracks 155-168)