Radiator Cooling Fan: Service and Repair

Coolant Fan and Coolant Fan 2, Removing and Installing

Perform the following:

Removing

- Remove the noise insulation.

- Remove the bolt - arrow - from the connecting pipe.






- Disconnect the connector - 1 -.






- Remove the mounting bolts - arrows - from the bottom of the air shroud.

- Remove the air intake connection from the lock carrier - arrows -.






- Remove the bolts - arrows - from the top of the air shroud.






- Remove the air shroud.

- Disconnect the connector - 1 - and free up the wiring harness. Installation position of harness connector deviates from the illustration.






- Remove the nuts - arrows - and the fan.

Installing

Installation is performed in the reverse order of removal. When doing this note the following:

Tightening specifications: